Page 1
HIGH EFFICIENCY GAS FIRE INSTALLATION AND USER INSTRUCTIONS All instructions must be handed to user for safekeeping Revision B - 10/08 Country(s) of destination - GB/IE Focal Point Fires plc, Christchurch, Dorset BH23 2BT Tel: 01202 499330 Fax: 01202 499326 www.focalpointfires.co.uk e-mail: sales@focalpointfires.co.uk...
Page 2
Please note : Except where otherwise stated, all rights, including copyright in the text, images and layout of this booklet is owned by Focal Point Fires plc. You are not per- The products covered by this booklet are protected under mitted to copy or adapt any of the content without the patent GB2275331B.
The decorative front frame assembly is fitted after the main firebox has been fitted to the wall. Pinoir, Memoirs and Saturn models; The out casing / frame components are fitted after the main firebox has been fixed to the wall.
Pinoir/Memoir models: To access these holes the front heatshield of the outlet grille will need to be released. This is achieved removal of the two retaining screws, one on either side, located at the top front corners of the firebox.
Remove any protective packaging, and remove any protective film that may be present on the frame. Pinoir and Memoirs models : Remove the stone facia panel from any protective packaging. The stone facia panel is supported by four M6 screws which protrude from the front of the outer cas- ing.
CORGI registered installer. The Installation instructions carry full servicing details for the use of the installer. LIST OF SPARE PARTS PART NO. ITEM F960017 Inner glass door assembly (Pinoir, Memoirs and Reflection models) F960006 Inner glass door assembly (Saturn models) F730023 Pilot assembly (Natural gas models) F730075...
Need help?
Do you have a question about the PINOIR and is the answer not in the manual?
Questions and answers