Motion Detect Monitor Mode; System Parameter Setting - Rollei Action Cam 100 User Manual

> Auto play: short press "confirm button "into auto play mode, when it plays the pictures, it will stay for 5
seconds then change to another one, when it plays the video, it will be replayed directly.
> Stop auto play: during auto play mode, short press "confirm button "to stop auto play.
> Stop TV-OUT: Please press the "power key" for long to turn off the camera.
Note: When play a large video file, need to wait a few seconds to a minute, it's a normal phenomenon.
14、Motion detect monitor mode
>Connect the yellow plug with the TV video input port(yellow) white plug connect with TV audio input
port(white).Please set the signal input refer to TV user manual.
> Turn on the camera, short press "Mode button "into motion detect video recording mode(yellow and blue
light will hold on together)
Please connect the plug of 2.5' AV cable with the camera's TV-OUT, after few seconds, the video will be appeared
on the TV. In the meantime the camera will enter into the state of intelligent video recording, When object moves
before the camera, the camera will record a 10 seconds, 1min, 5mins, 10mins(depends on system setting) video
file, and so the cycle.
> Short press "Mode button ", camera will change to motion detect monitor photo taking mode (yellow and red
light will hold on together).When object moves before the camera, it will start to take a photo automatically, and
so the cycle.
> Motion-detect video recording/ photo-taking loop recording: when TF card is full, the camera will delete the
former videos or photos automatically one by one to acquire relevant space to store new videos or photos. If turn
off loop recording function, the camera will turn off automatically when there is no enough space to record.
> Video recording time and turn on/off loop recoding function can be changed by system setting, please refer
system setting instruct.
> Stop motion detect monitor mode: Please press the "power key" to turn off the camera.
Note:
1、During the recording, short press "Mode button can change video and photo mode. Please obstruct the lens
when change the mode, the reaction will be fast
2、If the camera is not used underwater, you can open back cover to get better quality in audio recording.
3、Enter into this mode 3 minutes later, LED light will turn off, the camera is still at work, press any key to
instruct.
15、system parameter setting
> Please refer to TV- OUT operation into TV-OUT mode. Long press "confirm button ".
> Button function: short press " "choose or quit different setting, short press" "as up button, short press
" "as down button, long press " "save and quit the setting.