Pc Camera Function; Charging; Taking Video When Charging; Tv-Out Function - Rollei Action Cam 100 User Manual

> The camera turns on automatically, and a removable disk will appear in "my computer", you can view the
pictures or videos in the removable disk "DCIM/100DSCIM", and you can also copy these files to your computer.
> When it is connected with USB1.1 port on computer, please copy the video to your computer desktop, and then
replay it to avoid ragged playback.
Note: in the state of this mode, you can short press the "led light " to turn on the light. It can be used as a USB
table lamp.

10. PC camera function

> Install the CD driver software at the computer.
> Turn on the camera, after the vibration stopped, please connect it with the computer, at that time, a "camera"
Icon will be appeared in "my computer", it enters into PC camera function.
> Using the "third-party" applications software can also view real-time video of PC camera and save real-time
video into the local computer, e.g. Amcap etc.
Note: in the state of this mode, you can turn on the white light or infrared light for a better image effect.

11. Charging

> Put the matched AC adaptor into socket, and then connect with camera for li-battery recharging. The red
indicator turns on when charging, it turns off after the battery is full charged. The charging time is about 3 hours.
> To avoid the charge time be longer, it is proposed to charge with the adapter, and the computer charging is not
recommended.
Note: After connect with charger, camera will turn off automatically after 3 minutes, it's still charging after turns
off.

12. Taking video when charging

Put the AC adaptor into socket, then connect with camera, the camera will turn on automatically and enter into the
standby mode. The red light will constantly on indicating it's charging. In the mean time, each function is still
available for operating.
Note: when the camera turns off automatically, if you want to use it again, disconnect the camera from the adaptor
for about 5 seconds and then connect it again, the camera will restart
13．TV-Out function
> Please connect the plug of 2.5' AV cable with the camera's TV-OUT port, the yellow plug connect with TV
video input port(yellow), white plug connect with TV audio input port(white). Please set the signal input
according to the user manual of TV.
> Turn on camera, after a few seconds, the red and blue light turn on at the same time, the last photo or video will
be appeared on the TV.
> Manually play: by pressing 'up button 'or 'down button ' for browsing, when video camera Icon appears on
the top right corner, it indicates the file is video, press "confirm button "to play the video. Please set the TV
volume in order to get proper sound effect.