Reset The System; Parameters - Rollei Action Cam 100 User Manual

watermark and N indicates No-Hide watermark.
6. Save "time.txt" file and safely exit the movable disk.
7. Then turns on the power, the system time will be updated.
Note: When the battery unused for long time and the battery used up, the system time will be restore back to the
factory defaults.

17. Reset the system

Camera maybe can't use normally cause the outside influence, such as ESD etc. Please use a pin to press the pin
hole, then the camera will shut down, you can restart to use.

Parameters

Effective Pixels
Photo format
Video format
Frames
MD time setting
MD loop coverage
Video quality setting
Shooting Angle
Minimum Illumination
Illuminant frequency set
Video output format
Vibrating alert
Battery Capacity
Power consumption
Continuous video recording time About 3 hours（led indicator closed）
AC Adaptor spec
Charge time
USB Interface
Memory type
Memory card
Waterproof Depth
Weight
Product Dimensions
Notes: The above-said parameters may be changed with upgrading or updating, if there is any changes, they shall
be subject to the actual items.
System
1. Operation system: Microsoft Windows2000/XP/VISTA/WIN 7
2. CPU：Intel Pentium III processing 667MHZ or equivalent CPU
3. 256MB sound card and graphics card support DircetX8 or more advanced version. More than a multiple
drive, a standard USB1.1 or USB2.0 interface, 1GB or more free disk space.
5.0 Mega CMOS SENSOR
JPG 2560*1920
AVI HD 1280* 720
30fps
10sec、1min、5 min、10 min
Support turn on and off
Superior、Standard、economic
120 degree wide-angle
1LUX
60Hz、50Hz
NTSC、PAL
Support
3.7V/ 900mAh
Below 1W
DC5V 1A
About 3 hours
USB2.0 High Speed
Micro SD Card (TF card)
1GB-32GB
20 meters
75g
90*41*36mm