Setting Items; System Time Setting - Rollei Action Cam 100 User Manual

> Setting items:
1. Quality: Fine, Standard, Economy
Introductions: set the quality of the video, the consume of the insert storage will increase with high quality.
Note: Please use the brand high-speed (CLASS6) TF Card, to avoid the video pause when you record the
video!
2. MD capture time: 10 seconds, 1 minute, 5 minutes, 10 minutes
Illuminate: Setting motion-detect video recording time, it will save the recording video when reach this
time.
3. MD auto delete: on/off
Illuminate: Setting loop recording function. When TF card is full under the motion detect mode, the camera
will delete old file automatically to start new recording. If turn off this function, the camera will turn off
when TF card is full.
4. Date Input:
Illuminate: If the time stamp is wrong, please set correct time and date.
5. Light frequency: 60Hz 、50Hz
Illuminate: Setting light frequency according to electricity frequency to cancel the flash under the lamp.
6. TV Output: NTSC、PAL
Illuminate: When use TV-OUT function, choose the right video format to show the right color on TV
7. Language: English, French, German, Italian, Spanish, Portuguese, Chinese Traditional, Simple Chinese,
Japanese
8. System Reset: Cancel/Execute
Illuminate: If you want to reset the system, choose "Execute" and short press "
Note: System time won't be reset.
9. Time Stamp: date and time, off
Note: it is used for opening or closing images watermark markers.
10. Version
Note: Use for viewing the software version and related information.
16、System time setting
If the time stamp is wrong, please setting as below:
Method 1: Setting by TV, please refer to system parameter setting.
Method 2: Setting by computer
1. Turn off the camera;
2. Connect with computer by USB cable;
3. Open U-disk
4. Create a new "time.txt" file.
5. Open"time.txt" file and input relevant words of time&date setting up, as following "year.month.date
hour:minute:second on/off"(there is a space between date and time, and another space between time and water
mark switch). Please set time and date as per the following format:
Precautions:
The time character strings in the above-mentioned format is the time value you want to set up and pay attention to
type a spacebar between date and time, another spacebar between time and watermark switch. Y and N at the end
serve as the control character on the video file for adding the time & date watermark, Y indicates Yes-Add
Video with time watermark: "2011.03.22 20:00:00 Y"
Video without time watermark: "2011.03.22 20:00:00 N"
".