Advertisement
Please ensure the product package has the following contents:
Please note:
with the remote controller you cannot turn the camera on. Please ensure the camera is switched on before using the remote.
Press and hold the "Power off" button around 4sec. to turn the camera off.
To use the remote, please code first before power on the camera.
Coding procedures:
Note:
Turn the camera on‐press and hold the POWER button for several seconds.
When the camera is on, the Rollei logo will appear on the screen and the three red LED lights will glow red. The camera is now in video mode.
Once the camera is turned on, it goes to the video capture mode by default. Press SHOOT button to start recording. When the recording starts, you will see the red lights start flashing. To end recording, press the SHOOT button again.
To enter the Settings menu, press the POWER button (press and release immediately‐if it is held too long the camera will switch off).
Note:
The Setup menu is depending on the active mode. If the video mode is active, it will display video capture settings or if the Picture mode is active, it will display the Image capture settings.
By default, video mode is the active mode when you turn the device on.
This allows user to adjust Video quality settings.
Navigation: Use Wi‐Fi button to navigate, SHOOT button to Enter/Confirm selection, POWER button to go back.
This allows user to set the recording video resolution:
This allows user to set record duration
Factory default is Auto. If you switch Auto OFF, remember to adjust when lighting conditions change.
Following pre‐set modes are also available
Daylight, Cloudy, Tungsten, Fluor
SELECT Outdoor or Car to record in different scenes with better audio effect, SELECT OFF for video only.
This will enable auto image capture during the video recording:
This allows user to adjust the general device settings
To enter General Settings, enter the Settings menu first by pressing POWER button, then press and hold the SHOOT button for 3secs
Navigation:
Use Wi‐Fi button to navigate, SHOOT button to Enter/Confirm selection, POWER button to go back.
To set Auto Power off function
This will determine if the LCD will turn off after 1 min, 3 min or 5 min. Press any key to turn the screen on.
Select OFF to keep the screen always ON.
To rotate the screen.
This allows user to adjust the date &time.
Note:
Use the Wi‐Fi button to change the date and time, use SHOOT button to confirm. The date is entered in Year/Month/Day format. Time is based on a 24hr clock.
To select the device language
Selecting the correct light frequency will avoid the possibility for strobing.
Set up your new Wi–Fi Password.
Note:
The default Wi–Fi Password is 1234567890.
Use the Wi‐Fi button to navigate, use SHOOT button to confirm.
Set up your new Wi‐Fi name.
Note:
Use the Wi‐Fi button to navigate, use SHOOT button to confirm. The name is entered in " Wi‐Fi_CAM_000" format, you can only change the last three numbers which are displayed with cycle numbers.
This is to format the card. Choosing to format the card will permanently erase all data on the card.
This mode will allow users to take snapshots
To activate this mode:
To enter the SETUP menu for Picture Mode, press POWER button (press and release immediately‐if it is held too long the camera will switch off).
Before using the Rollei Actioncam 400 for the first time you should fully charge the battery.
Procedure:
Once the camera is turned on, it goes to the video capture mode by default. Press SHOOT button to start recording. When the recording starts, you will see the red lights start flashing. To end recording, press the SHOOT button again.
To take snapshot, you will need to switch the camera from video mode to image capture mode.
To enter this mode:
Navigation: Use Wi‐Fi button to navigate, SHOOT button to Enter/Confirm selection, POWER button to go back.
This will allow you to watch the captured videos & images. Enter the Picture mode first, then press and hold the SHOOT button for 3secs.
To watch a captured video, go to VIDEO and select the file.
To view a captured image, go to IMAGE.
To view a loop recording, go to LOOP.
To delete the image, select the file and Press POWER button. You will see delete option there. You can select the option to delete a single file or all files.
To exit Playback mode press and hold the SHOOT button to return to the normal recording mode.
You can display the camera LCD screen on a TV screen. Note: You will need a Mini HDMI to HDMI cable. z Turn the camera on z Connect Mini HDMI end to the port on camera and HDMI end to HDMI port on the TV z Select the right source on the TV z Turn the camera on
The Rollei Actioncam 400 allows full camera control, live previewing and playback of photos/videos on most Smartphones and Tablets.
Note:
To watch the recorded videos on your phone, you need to download them first.
Use the USB cable (J) supplied to connect the camera to your computer. The camera LCD will display MSDC icon and your computer will see your camera as an external storage device. Alternatively you can remove the Micro SD card and use a card reader (not included) to achieve the same result.
Note:
You can also transfer entire folders of pictures / videos to your computer.
Connect the camera to PC using supplied USB cable (J), when you see MSDC on the camera LCD screen, press and hold the SHOOT button for 3secs. Then you will see PCCAM on the camera Screen.
Note:
You will not be able to record when the camera is on PCCAM mode.
Notes:
Q. Why are the red LEDs flickering?
A. The battery is running low. You must recharge the camera.
Q. My Rollei Actioncam 400 will NOT turn on. Why?
A. The battery is flat. You need to recharge it (full recharge from flat will take about 5 hours).
Q. My Rollei Actioncam 400 turns off automatically. Why?
A: The battery is running flat or you set auto power off function.
Q. Videos and pictures are blurred. Why?
A: The lens may be dirty. Clean the lens first.
Q. My Rollei Actioncam 400 cannot be seen by my computer. Why?
A: Try a different USB cable or different USB port.
Underwater | Down to 30m (with waterproof casing) |
Sensor | 3.0 megapixels CMOS sensor |
Resolution | Video: 1080P@30fps, 720P@60fps, 720P@30fps |
Still photo: 3 megapixels (12 megapixels interpolated) | |
Storage type | Micro SD card up to 32GB (not included) |
Lens | 150°‐view fixed lens |
Lens aperture | F/2.5 f=2.65mm |
Lens focus | 0.5m to infinity |
Shutter speed | 1/30 to 1/2000 sec |
Video Looping | OFF, every 2min, every 5min |
Sensitivity | Automatic ISO 100‐200 |
Microphone | Built‐in |
Display | 2" TFT LCD |
Format | Video: MOV H.264 |
Still photo: JPEG | |
Power supply | 3.7V/1000mAh removable Li‐Battery |
Battery life | Video: about 2.0 hours without Wi‐Fi |
Dimensions | 54x37x51mm |
Casing | 49.5x76x84mm |
Operating System | Windows XP / Vista / 7 / 8 / MAC OS |
App Requirements | Apple iOS & Android |
Interface | HDMI (HDMI cable not included) |
High speed USB 2.0 |
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Actioncam 400 that isn't answered in the manual? Leave your question here.