➀ Velocity generating nozzles available for Blower Model BDP only.
Table 15.1 - Blower Unit Model BDP Velocity generating Nozzle Performance Data (feet)
Nozzle
Type
40°
Max. Mounting Ht. (ft.) H
Downward
Heat Throw (ft.) T
Nozzle
Heat Spread (ft.) S
Max. Mounting Ht. (ft.) H
90° Vertical
Nozzle
Heat Spread (ft.) S
Max. Mounting Ht. (ft.) H
40° Splitter
Heat Throw (ft.) T
Nozzle
Heat Spread (ft.) S
Max. Mounting Ht. (ft.) H
5-Way
Nozzle
Heat Spread (ft.) S
➁ The above table is based on an inlet air temperature of 70°F and an air temperature rise of 55°F. Air deflectors on, 40° and 90° discharge nozzles set perpendicular to
the face of the air discharge opening. On 5-way nozzles all air deflectors set perpendicular to floor. Static pressure measured at 0.1" W.C. for 90° nozzle, 0.2" W.C. for
40° downward and 5-way nozzle, and 0.3" W.C. for 40° splitter nozzle. Outlet velocities are approximately 1750 FPM for the 40° nozzles, 1000 FPM for the 90° nozzle
and 1300 FPM for 5-way. For motor size, drive and blower rpm refer to pages 10 and 11. Mounting height measured from bottom of unit.