Calling Up And Stepping Through Program Sequences - Moog Memorymoog 345 Owner's Manual

CALLING UP AND STEPPING THROUGH PROGRAM SEQUENCES

To get into the PROGRAM SEQUENCE MODE hit PREFIX letter D, followed by any number
from 0 to 9, followed by ENTER. This gets you to one of the 10 PROGRAM SEQUENCES. What
will appear in the Alphanumeric Display looks like this:
The number in the PROGRAM DISPLAY is the first program of the PROGRAM SEQUENCE.
The B at the left of the screen indicates the beginning of the SEQUENCE. As you step through the
SEQUENCE, the number that appears in this spot indicates the previous program number. The cen-
ter of the display shows the PROGRAM SEQUENCE number, and the number to the right of the
screen is the program number next in line in the SEQUENCE.
To step through the PROGRAM SEQUENCE, use the A PREFIX switch to go forward and
the B PREFIX switch to go backward. You can also use PROGRAM ADVANCE and PROGRAM
BACKSTEP footswitches for these functions. (Note that the footswitches aren't supplied with the
instrument.)
Experimenting with the programs, editing them, and stepping through the PROGRAM SE-
QUENCES should keep you busy for at least a few minutes. It should also start generating questions
about other features on the instrument. Section II of the manual provides brief descriptions of all the
various functions of the Memorymoog, while Section III offers step-by-step explanations. From this
point, refer to those sections as the need arises.
4
SYSTEM CONTROLLER
17
PROGRAM
B P1 26
1 2 3 A
4 5 6 B
7 8 9 C
0 D
RECORD ENTER
INTERLOCK