Moog Memorymoog 345 Owner's Manual page 11

3.3 NUMERIC KEYBOARD.
This calculator-type keyboard is used for calling up programs and other control functions. You do
this by hitting one or two numbers (from 0 to 99) and then pressing the ENTER button.
3.4 RECORD INTERLOCK.
This switch is used to temporarily lock the front panel settings in memory. By hitting LOCK, the
Alphanumeric Display (3.2) will read "LOCK," indicating that the current panel settings are tempo-
rarily locked, and turning pots or hitting switches will have no effect. This allows you to call up an-
other patch from memory (by hitting a number and pressing ENTER) without losing the locked
patch. Hitting the LOCK switch after you've called up another patch will bring up the locked patch.
This is useful for checking edited patches against the original version.
3.5 STORING A PATCH IN MEMORY.
This is done by holding the LOCK button (3.4)
down and hitting the ENTER button (see 3.3). This
loads whatever is currently shown on the front panel
into the memory position called up in the Program
Display (3.1). Note that recording a patch is impos-
sible if the Memorymoog is "write disabled," mean-
ing that a protect function against storing unwanted
information in memory is on. To turn the protect
function off and on, you must know the four-digit
security code (see Section III). Attempting to store a
patch in memory when the disable feature is on will
cause the Alphanumeric Display (3.2) to read
"DISABLED." When a patch has been successfully
written into a memory position the Alphanumeric
Display will read "RECORDED."
3.6 PREFIX BUTTONS.
PREFIX A advances programs stored in the PROGRAM SEQUENCE MODE (see below). Also
advances program number by one in normal operating mode.
PREFIX B steps in reverse through the programs in the PROGRAM SEQUENCE MODE (see be-
low). Backsteps program number by one in normal operating mode.
PREFIX C1 (hit C, hit 1, hit ENTER) saves programs onto cassette tape (for more information on
this procedure see the next section of the manual).
PREFIX C2 (hit C, hit 2, hit ENTER) loads programs from cassette tape into the Memorymoog's
memory.
PREFIX C3 (hit C, hit 3, hit ENTER) verifies correct loading of programs when putting programs
from the Memorymoog onto cassette tape.
PREFIX C4 is used for defeating voices that aren't tuning up for whatever reason. See text in next
section of the manual for details.
8
SYSTEM CONTROLLER
PROGRAM
1 2 3 A
4 5 6 B
7 8 9 C
0 D
RECORD ENTER
INTERLOCK