Removing And Replacing The Alert Grommet - Motorola T193 Service Manual

Level III Service Manual

Removing and Replacing the Alert Grommet

6881038B70
1. Remove the battery cover, battery, front cover, transceiver board assembly,
cover plate, and display module as described in the procedures
2. Using the flat end of the disassembly tool, carefully pry the alert grommet from
the alert transducer. The grommet should come away easily. See Figure 13.
ALERT GROMMET
DISASSEMBLY TOOL
TRANSCEIVER BOARD
Figure 13. Removing the alert grommet
3. To replace, stretch the grommet over the alert transducer until it is in place.
4. Replace the display module, cover plate, transceiver board assembly, front
cover, battery, and battery cover as described in the procedures.
July 27, 2001
Disassembly
.
010515o
25