Getting Started Battery Installation; Belt Clip - Uniden uh710sx Owner's Manual

UNIDEN Model uh710sx/uh720sx UHF CB Radio
GETTING STARTED
Battery installation
Your uh710sx/uh720sx pack includes 3 AA rechargeable NiMH batteries to
power the unit. You must install and then charge the batteries for 15 hrs
before use. The uh710sx/uh720sx can also use 3 AA Alkaline batteries.
Do not mix old and new batteries to avoid damage to the unit.
To install batteries :
1. Make sure your radio is OFF.
2. Remove the battery compartment door
by pressing down then sliding
the cover away from the radio.
3. Install the batteries to the
battery compartment.
4. Replace the battery
compartment door.

Belt Clip

To attach the belt clip:
Slide the belt clip into the catch until it snaps into place.
To remove the belt clip:
Pinch and hold the belt clip and latch and then slide the belt clip up and out
of the catch.
8