Table of Contents
Advertisement
Record
Motion Detect (Press REC to start recording)
Select Motion Detect and press
Tap
or the one in the remote controller to start Recording. If the recording environment is still, recording will stop, show
Detecting.... will appear in the bottom of screen until the environment has some motion, the recording will start again, and the same
condition will be repeated.
In Motion Detect Mode , tap icon
PV-500EVO User Manual
|
to enter Motion Detect mode.
, the setting items appear:
Resolution (352*288 /640*480/720*56/1024*768/1280*720/1280*960)
●
Quality (Good/Norma/ Low)
●
Frame Rate ( 1 / 5/ 15 /20/25)
●
Audio (Enable/Disable)
●
Frame Counter Stamp (On/Off)
●
Timestamp (On/Off)
●
Device ID Stamp (ON/Off)
●
Display (LCD/TV/BOTH)
●
Motion Detect Level ( High/Medium/Low)
●
Motion Detect Duration (30 sec/1min/3 min/ 5 min/ 10min)
●
Motion Detect Zone >Press |u to select the area for target of motion detect.
●
Microphone Sensitivity
●
Overwrite
●
32
Advertisement
Table of Contents
