Table of Contents
Advertisement
Cause 3:
K6 not set to surround mode.
Set to surround mode, or select one of
Remedy:
the sound fields.
Programme contains no information on
Cause 4:
the auxiliary channels (e.g. stereo ma-
terial).
Remedy:
If you wish, call up the 'Main Menu' and
select a sound field.
The level for the channel affected is set
Cause 5:
too low.
Call up 'Loudspeaker Balance Menu'
Remedy:
and raise the level.
Problem:
No bass, or inadequate bass.
No subwoofer connected, but activated
Cause 1:
in 'Loudspeaker Menu'.
Remedy:
Connect subwoofer, or disable sub-
woofer in 'Loudspeaker Menu'.
Size of loudspeakers entered incor-
Cause 2:
rectly in 'Loudspeaker Menu'.
Remedy:
Call up 'Loudspeaker Menu' and
check that settings match the loud-
speakers in your system; correct if
necessary.
Problem:
The signal from an analogue source
device occasionally suffers distor-
tion during very loud passages. The
integral screen shows
The analogue/digital converter is over-
Cause:
loading.
Re-calibrate the analogue/digital converter
Remedy:
to this source device. See 'Inputs Menu'.
Picture problems:
Problem:
'Main Menu' not displayed on the
television screen.
Cause:
On-screen display of 'Main Menu'
switched off in 'Configuration Menu'.
Remedy:
Call up 'Configuration Menu' and
switch on 'On-screen Menu'.
Problem:
No picture from some or all source
devices.
Source devices not supplying the
Cause:
switching signal which the TV set re-
quires to switch over to AV mode.
Set television to 'constant AV opera-
Remedy:
tion' mode.
' O V E R L O A D '
' O V E R L O A D '
' O V E R L O A D '
' O V E R L O A D '
Problem:
Neither on-screen menu nor other
external programs appear on the TV
screen. TV only shows those sta-
tions which are received via its own
aerial.
Video cable not connected properly.
Cause 1:
Remedy:
Push in all connectors firmly.
The TV set does not switch automati-
Cause 2:
cally to the AV input.
Remedy:
Set the TV to 'AV mode'.
Problem:
Picture unstable.
Synchronisation signal absent.
Cause:
Remedy 1: Push connector in firmly, or set TV to
'AV mode'.
Remedy 2: When using component video with
RGB colours an additional cable is
necessary for synchronisation (see
'Connection
tors/TVS with standard (composite)
video input').
Problem:
Monochrome picture only.
Incompatible video norms set on the
Cause:
TV, the K6 and the source device.
Remedy:
Set TV, K6 and source device to the
same video norm.
Problem:
Nothing appears on the integral
screen.
Cause:
The screen is switched off.
Switch the screen on again (see
Remedy:
button).
Problem:
No picture when using source VCR
or STB.
Cause:
The wrong video norm is selected.
Remedy:
In the 'Video Norm Menu' choose the
appropriate setting – YC or CVBS.
Problem:
Wrong colours when using source
with component video output.
The setting of the colour norm for com-
Cause:
ponent video is wrong.
Remedy:
In the 'Video Norm Menu' select the
appropriate setting – YUV or RGB.
59
diagrams
for
moni-
Appendix
- Quick Links:
- Pre out
Hide quick links:
Advertisement
Table of Contents
