T+A K 6 CV User Manual page 60

Problem: When playing an NTSC or PAL-DVD
the on-screen menu is distorted.
The TV set does not feature automatic
Cause:
format detection for NTSC or PAL, and
has been set manually to NTSC or
PAL. Dependent on the version of the
K6 the on-screen menus are only gen-
erated in NTSC or PAL format, so this
operation is not possible.
Use a TV set with automatic PAL /
Remedy:
NTSC format switching, or use the K6's
integral screen.
Problem: OSD menu black / white only
The TV set has no automatic S-Video /
Cause:
CVBS switching, and is configured for
S-Video.
Set the TV set to CVBS mode (see also
Remedy:
'Adjustments at the TV set').
Problem: Picture from an external source de-
vice correct, but no sound audible
through the K6.
No sound connection between source
Cause 1:
device and K6.
Complete the sound connection (ana-
Remedy:
logue or digital depending on mode);
see section entitled 'Setting up, using
the K6 for the first time'.
No sound input, or the wrong sound
Cause 2:
input, has been assigned to the video
input in the 'Inputs Menu'.
Check the sound input to which the
Remedy:
source device is connected. Call up the
'Inputs Menu' and carry out the correct
assignment.
The loudspeakers are switched off.
Cause 3:
Remedy: Switch on the speakers using the *
button.
Appendix
Problems in DVD / CD mode:
Problem: The disc does not play after the
drawer is closed.
Disc not correctly inserted.
Cause 1:
Insert disc centrally, printed face up.
Remedy:
Disc dirty.
Cause 2:
Carefully wipe disc with a soft cloth,
Remedy:
working from the center to the edge.
Insert and try again.
Disc damaged in Table of Contents
Cause 3:
area (TOC).
Disc is unusable.
Remedy:
Device has cooled down severely (e.g.
Cause 4:
after being transported), and conden-
sation has formed on the laser pick-up
optics.
Leave the unit in a warm, well venti-
Remedy:
lated place for about 1 hour to warm up.
Problem: Disc stops playing or 'skips'.
Disc is dirty or damaged.
Cause:
Clean the disc. Damage cannot be
Remedy:
repaired.
Problem: Black / white or distorted image
when playing a DVD or VCD.
The TV set is not set to the same video
Cause:
norm (PAL / NTSC) as the disc, or
cannot process its video norm.
Remedy: Use a multi-norm TV set. These units
switch to the current video norm auto-
matically, or can be switched manually.
Problem: Distorted picture.
The disc is soiled, e.g. by finger marks.
Cause:
Clean disc with a soft cloth, wiping in
Remedy:
straight lines from center to edge.
Problem: The device does not return to the
start screen after removing the disc.
The program may be waiting for inser-
Cause:
tion of a further disc.
Remedy: Insert next disc.
60