Dial-Up Networking Services; Connect To A Hid Device; A2Dp/Avrcp Services - Motorola MC9500-K User Manual

A dialog box appears requesting if you want to transfer contacts to the car kit.
8.
Select Yes or No.
9.
If Yes is selected, contacts from the MC9500-K are transferred to the car kit.
10.

Dial-Up Networking Services

Dial-up networking allows the user to connect a PC or laptop to the MC9500-K and use the MC9500-K as a modem
to connect to an office network or ISP.
Before setting up dial-up networking, obtain dial-up information and other necessary settings (username, password
and domain name, if required) for the office network or ISP. To create a new Bluetooth connection:
Ensure the MC9500-K is discoverable and connectable.
1.
On the PC or laptop, set up Bluetooth according to the manufacturer's instructions.
2.
On the PC or laptop Bluetooth software, search for the MC9500-K and select the Dial-up Networking service.
3.
Using dial-up software on the PC or laptop, connect to the MC9500-K.
4.
The MC9500-K phone function dials the ISP number and connects to the ISP.
5.
To verify, on the PC or laptop, launch Internet Explorer and open a web site.
6.

Connect to a HID Device

The MC9500-K can connect to an Human Interface Device (HID) device such as a Bluetooth keyboard or mouse:
Ensure that Bluetooth is enabled on both devices.
1.
Ensure that the Bluetooth device to discover is in discoverable and connectable modes.
2.
Ensure that the two devices are within 30 feet (10 meters) of one another.
3.
Tap Start > Settings > Connections tab > Bluetooth icon > Devices tab.
4.
Tap Add new device. The MC9500-K begins searching for discoverable Bluetooth devices in the area.
5.
Select a HID device from the list.
6.
Tap Next. The Enter Passcode window appears. Refer to the device's User Manuals for more information.
7.
NOTE If Smart-pairing is configured and the device is requesting one of the pre-defined PINs, the Enter
Passcode window does not appear.
Tap Connect. The MC9500-K connects to the HID device.
8.

A2DP/AVRCP Services

A2DP/AVRCP is used to connect to a high-quality stereo headset:
Ensure that Bluetooth is enabled on both devices.
1.
Ensure that the Bluetooth device to discover is in discoverable and connectable modes.
2.
Ensure that the two devices are within 30 feet (10 meters) of one another.
3.
Tap Start > Settings > Connections tab > Bluetooth icon > Devices tab.
4.
Using Bluetooth 7 - 15