Description Of The Product; Centronica; Mechanical Concept And Layouts; Variants - Electrolux HIC Service Manual

1.

Description of the product

This service manual describes a family of hob independent controls named HIC. The control is
equipped with 7 Segment displays, LEDs and infrared key sensors for up to 5 cooking zones and
mounted in a hob under the glass ceramic or separate in a housing (Centronica). The Power board
could be HOC2000 or Induction G4. The communication is to the power board via Macs Bus Light
bus (serial communication).
The electronic is supplied by 5V±5%/150mA regulated DC via MACS Bus.
peak power:
mean power:
ripple voltage:
mean current:
maximum input current:
The stand by consumption must be less than 0.1W

1.1. Centronica

- User Interface with touch inputs and displays / indications on version-specific glass panel,
remote-mounted (outside the hob) in a separate housing or built-in in built-under oven control
panels.
- Radiant Power Board, mounted inside or outside the hob (HOC2000)
- Cable Link 3-pole connects the User Interface and the Power Board together (MACS Light
Communication) Power supply is from Power Board.
- Cooking power regulation with 12 (13 with power) steps.
- Residual heat indication in hobs, not calculated
(not in CENTRONICA-UI displayed)
- Priority code ("Prio-code"): individual user-pre-programming of each multiple cooking zone
2.

Mechanical Concept And Layouts

2.1. Variants

The following drawings describe the maximum configurations.
Variants with less keys or LEDs are possible.

2.1.1. Dimensions

Compact (horizontal, vertical, large hobs):
Split:
Centronica:

2.1.2 Variant 1 - compact horizontal

17 Sensors
18 round LEDs
6 7-segment displays
Size: 270mm x 36mm²
DGN-TDS-N 11.03 U. H. / A. B. © Electrolux
P = 1.25 W
max
P = 750 mW
mean
U = ±100mV
r
I = 150mA
mean
I = 280mA
max
270 x 36 x 5.4
135 x 36 x 5.4
230 x 45 x 5.4
- 4 -
(l x w x d)
599 512 232 EN