Connecting The Drive To Your Network - Western Digital My Book Live User Manual

State LED
Link up – 1000 Mbps Link
Link idle Activity
Link busy Activity

Connecting the Drive to Your Network

1. Select Getting Started.
2. Following the step on your screen or outlined in "Physically Connecting the
Drive" on page 11, connect your My Book Live device to your home or small
office network.
Note: Remove the sticker from the back of the unit prior to connecting your device.
Appearance State Description
Green Cable is plugged in, and both ends of the
link have successfully established
communications. Network negotiated at
1000 Mbps.
Off Active communication is not in progress.
Green - Blinks Active communication is in progress.
CONNECTING THE DRIVE AND GETTING STARTED – 13
MY BOOK LIVE
USER MANUAL