Handicare IBIS XA User Manual page 35

Frame width Ibis XA
1. Loosen the bolts (A) with a 13 mm
spanner and remove them.
2. Put the frame tube (B) in the
desired position, so that the holes
are level with the frame.
3. Tighten the bolts (A) securely.
Position of the wheels Ibis XC
1. Put the frame on a solid base, so
that the wheels are off the ground.
2. Remove the manual control (A).
3. Remove the foot bracket (B).
4. Loosen the nut (C) with a 19mm
spanner.
5. Move the wheel into the desired
position.
Operating instructions
6. Tighten the nut (C) securely.
Changing the position of the
wheels may affect the stability of
the wheelchair. Check the
stability of the chair and make
sure the anti-tip brackets are
well adjusted.
Check the brake.
Position of the wheels Ibis XA
1. Put the frame on a solid base, so
that the wheels are off the ground.
2. Loosen the bolts (A) with a 19 mm
spanner and remove them.
3. Move the wheel plate (B) into the
desired position.
4. Tighten the bolts (A) securely.
Changing the position of the
wheels may affect the stability of
the wheelchair. Check the
stability of the chair and make
sure the anti-tip brackets are
well adjusted.
Check the brake.
35