CPcam 4 CH Digital Video System User Manual page 14

3. REC (RECORD)
Set up which channel you want to record.
ON : when alarm input is triggered, DVS will record alarming channel more frequently.
For example : when CH01 is triggered, the record method will become 1-2-1-3-1-4....
OFF : DVS will not record.
4. BR (BRIGHTNESS)
Adjust the brightness of each channel. The level is from 0 to 63.
5. CT (CONTRAST)
Adjust the contrast of each channel. The level is from 0 to 63.
6. CL (COLOR)
Adjust the color of each channel. The level is from 0 to 63.
7. HUE (HUE)
Adjust the hue of each channel. The level is from 0 to 63.
RECORD
1. RECORD IPS
Select the recording speed. The options are
as following :
NTSC－30、15、8、4、2、1
PAL－25、12、6、3、2、1
2. QUALITY
There are four quality settings : BEST, HIGH, NORMAL, BASIC.
NOTE : The relationship of Record time, IPS and Record quality,
please refer to page.24 Recording Speed.
3. RECORD MODE
There are three recording settings : QUAD-FRAME, QUAD-FIELD,
MULTIPLEX.
ALARM
1. ALARM ENABLE
Alarm will be triggered by event occurrence when the setting is "YES".
2. ALARM DURATION
Set the reaction time of the alarm mode responds to a buzzer.
Default setting is 10 Sec. Options are 10 Sec, 15 Sec, 20 Sec,
30 Sec, 1 MIN, 2 MIN, 3 MIN, 5 MIN, 10 MIN, 15 MIN, 30 MIN,
ALWAYS, AUTO.
NOTE : 1. Video loss, and Alarm messages will be shown the same as Alarm Duration time.
2. When the setting is AUTO, the alarm duration time is according to the setting
of the external alarm device.
3. During ALARM DURATION'S setting time, users can restart ALARM function by
pressing both "ENTER" + "STOP" buttons.
(RECORD)
RECORD IPS
QUALITY
RECORD MODE
13
(MENU)
TIMER
CAMERA
RECORD
ALARM
DWELL
PIP
MOTION
DISPLAY
REMOTE
USER
SYSTEM
EVENT
30
NORMAL
QUAD-FRAME
(MENU)
TIMER
CAMERA
RECORD
ALARM
DWELL
PIP
MOTION
DISPLAY
REMOTE
USER
SYSTEM
EVENT