Remote User; System Event - CPcam 4 CH Digital Video System User Manual

6. MESSAGE LATCH
To select whether the DVS messages will disappear after 10
seconds or remain on screen. NO is the default setting which the
messages will disappear after 10 sec.
NOTE : Video loss, and Alarm messages will be shown
the same as Alarm Duration time.
7. DATE DISPLAY
To set the date Y/M/D, M/D/Y, D/M/Y and OFF on monitor or not.
8. DATE
To set the date on the DVS.
9. TIME
To set the time on the DVS.
10. CLEAR HDD
Delete all the contents of the HDD. When you choose "YES" on this option, press "ENTER" and you
will be prompted with the question shown: Press "→" to clear HDD or press "←" to cancel.
11. SYSTEM RESET
Reset all system to the factory default settings. Select "YES" and press "ENTER" button.
TIMER
1. DAY
Select the day, or days of the week (Mon–Fri / Sat-Sun / Daily) that you wish to schedule
the DVS to automatically record.
NOTE :
1. Change the date by "
2. If you have selected the date and
to a new day, then the
For specific date of
Ending Time over 23:59. For example: If you set Timer Schedule Day as Sunday,
and START from 11:30, but End on 00:20, then Recording Timer Schedule is
set as from every Sunday's 11:30 to next Sunday's 00:20. If you only want to set
Recording Timer Schedule from every Sunday 11:30 to Monday 00:20, then you
should set Recording Timer Schedule as Sunday from 11:30 to 23:59, and Monday
from 00:00 to 00:20.
3. It is not suggested that users press "STOP" button or restart the system during setting
time. In doing so, the recording will stop, and users can resume recording by pressing
"ENTER" + "REC".
+ -
" and " " buttons.
Timer
recording set from that specific day
Timer
Recording Schedule will be set as whole week.
Timer
Recording Schedule, it is not recommended to set
BUZZER
EXT ALARM
VLOSS ALARM
KEY MUTE
HDD OVERWRITE
MESSAGE LATCH
DATE DISPLAY
DATE
TIME
CLEAR HDD
SYSTEM RESET
11
(SYSTEM)
ON
ON
ON
YES
YES
YES
D/M/Y
26-DEC-2003 [FRI]
22:55:34
YES
YES
(MENU)
TIMER
CAMERA
RECORD
ALARM
DWELL
PIP
MOTION
DISPLAY
REMOTE
USER
SYSTEM
EVENT