Appendix C Hs-2D Maintenance - Microscan HS-2D User Manual

Appendix C — HS-2D Maintenance
HS-2D maintenance guidelines are provided below.
Cleaning the HS-2D Window
The HS-2D window should be clean to allow optimum performance. The window is the clear
plastic piece inside the front of the reader. Do not touch the window, as fingerprints may
impede decode performance. The HS-2D uses CMOS technology that is much like a digital
camera, and marks on the window will interfere with image captures.
If the window becomes dirty, clean it with a soft, non-abrasive cloth or a facial tissue (no
lotions or additives) that has been moistened with water. A mild detergent may be used to
clean the window, but the window should be wiped with a water-moistened cloth or tissue
after using the detergent. The HS-2D housing may be cleaned in the same way.
For applications that require cleaning with disinfectant, please use products with the following
ingredients:
• Isopropyl Alcohol
• Ethyl Alcohol (Denatured Grade)
Do not use bleach.
HS-2D Handheld Reader User's Manual
Appendices
A-7