Cadillac Escalade Owner's Manual page 96

AKENG44_Escalade Page 96 Wednesday, July 16, 2008 12:22 PM
Instrumentation and Controls
A
Air Outlet Selector
Press the up or down arrow on
switch to stop the automatic
operation and to manually select
one of the modes controlling the
direction of airflow. The display
shows the selected mode.
If this control is pressed while the
system is in automatic mode,
AUTO will disappear from the
display.
. . . 96
B C D
AUTO
AUX
E G F
The system will continue to
control the fan speed automatical-
ly.
Pressing when the system is off
will change the air delivery mode
without turning the system on.
Whenever the system is turned off,
the display goes blank after
displaying the current setting.
This mode directs airflow
through the instrument
panel outlets.
The blending mode directs
airflow through both the
instrument panel outlets
and the floor outlets. Some
air may go to the wind-
shield and side window
vents. The air coming from
the floor outlets may be
slightly warmed.
The heater mode directs
most of the airflow through
the floor outlets, with some
air going to the windshield
and side window defroster
vents.
Use this mode to direct air
to the rear of the vehicle.
The recirculation function
cannot be activated in this
mode.