Cadillac Escalade Owner's Manual page 59

AKENG44_Escalade Page 59 Wednesday, July 16, 2008 12:22 PM
Once the desired setting is
displayed, press the
to select it.
You may now either exit pro-
gramming mode or program
the next available feature.
To exit programming mode,
see "Exiting Programming
Mode" later in this section.
• PARK TILT MIRRORS
button
With this feature turned on,
the passenger's and/or driver's
mirror will tilt down to a
pre-programmed position,
whenever the vehicle is shifted
into R (Reverse) to allow you to
view the curb while you parallel
park.
Press the button to enter the
submenu.
While in this submenu, press
the button repeatedly to
scroll through the following
options:
- OFF
The outside mirrors do not tilt
down when the vehicle is
shifted into R (Reverse).
This is the default setting.
Section 1
- DRIVER MIRROR
The outside mirror on the
driver's side of the vehicle will
tilt down to a curb-view
position when the vehicle is
shifted into R (Reverse).
- PASSENGER MIRROR
The outside mirror on the
passenger's side of the vehicle
will tilt down to a curb-view
position when the vehicle is
shifted into R (Reverse).
- BOTH MIRRORS
Both outside mirrors will tilt
down to a curb-view position
when the vehicle is shifted
into R (Reverse).
- NO CHANGE
59 . . .
–