Cadillac Escalade Owner's Manual page 48

AKENG44_Escalade Page 48 Wednesday, July 16, 2008 12:22 PM
Instrumentation and Controls
• PRESS TO CALIBRATE
COMPASS
Note: This feature may not be
available on all vehicles.
If an incorrect reading is
displayed, first check that the
compass is set to the correct
variance zone. If it is, the
compass may need calibration.
There may be a strong
magnetic field (from various
magnetic objects on the
vehicle) interfering with the
compass.
Remove these objects or ask
your dealer for assistance.
. . . 48
Do not use other features such
as the power windows, sunroof
or the climate controls during
the calibration procedure.
- Drive your car to an open
parking lot where you can
safely drive in a full circle.
- Press repeatedly to select
the compass calibration
display.
- Press the button.
CALIBRATING: DRIVE IN
CIRCLES will appear on the
display.
- Slowly and safely drive your
vehicle in a full circle until
CALIBRATION COMPLETE
appears on the display.
Vehicle speed must be less
than 8 km/h (5 mph).
If CAL appears on the display,
then the compass did not
calibrate. Repeat the
procedure to calibrate the
compass.