Cadillac Escalade Owner's Manual page 183

AKENG44_Escalade Page 183 Wednesday, July 16, 2008 12:22 PM
To install the seat:
1. Open the liftgate.
2. Slide the front outboard seat
wheels into the track on the
floor.
3. Roll the seat into position and
lock it into place.
The front latches should lock
into place. If the latches do not
lock, try tilting the rear of the
seat upwards.
4. Push the rear of the seat down
to lock the rear latches.
CAUTION
A seat that isn't locked into
place properly can move
around in a collision or sudden
stop. People in the vehicle
could be injured. Be sure to lock
the seat into place properly
when installing it.
5. Return the seatback to the
upright position.
The seatback cannot be raised
to the upright position unless
the seat is secured to the floor.
CAUTION
If the seatback isn't locked, it
could move forward in a
sudden stop or crash. You or
others may be injured. Always
press rearward on the seatback
to be sure it is locked in place.
Section 2
6. Make sure that the seatback,
when returned to its original
position, is securely locked in
place.
7. Return the safety belts to their
original positions so they will
be available for the rear seat
passengers to use.
CAUTION
A safety belt that is twisted or
improperly attached or routed
won't provide the protection
needed in a crash. The person
wearing the belt could be
seriously injured. After raising a
rear seatback, always make sure
that the safety belts are not
twisted and that they are
properly attached and routed.
183 . . .
–
–