Activating The Plate Warmer - Miele CVA 5065 User Manual

Activating the plate warmer

You can connect a Miele EGW 4000-14,
-29 or an EGW 5000-14 to the coffee
machine using a special connection
cable available as an optional
accessory from your Miele Dealer or the
Miele Spare Parts Department.
Once the plate warmer is connected,
you will need to "install" the plate
warmer in the "Settings" menu.
^ Select "Settings F" from the main
menu, and then touch the OK sensor.
Settings
Plate warmer
Plumbed water supply
^ Touch the right arrow sensor until
"Plate warmer" is highlighted and
touch the OK sensor.
There are three options:
Automatic
The plate warmer will switch on and off
together with the coffee machine. The
plate warmer must be switched on with
the On/Off control.
If you have programmed the coffee
machine to switch on at a specific time,
the plate warmer will always switch on
approx. 30 minutes before the coffee
machine is due to switch on so that
your cups are warmed up ready for
your coffee.
Settings: Customising your machine
On
You can switch the plate warmer on
and off manually whenever you want,
independently of the coffee machine.
Off
The plate warmer will not switch on
because the coffee machine is not
supplying it with any electricity. The
coffee machine is delivered with "Off"
as the default setting.
To switch the plate warmer on
independently of the coffee machine
You can switch the plate warmer on via
the coffee machine, even without the
coffee machine being switched on.
^ Touch the OK sensor whilst the
^ Select "Plate warmer" and touch the
^ Select "Manual - on" and touch the
The plate warmer is now switched on.
To switch the plate warmer off again,
proceed as above again, but select
"Manual - off" instead of "Manual -
on".
If you have forgotten to switch the
plate warmer off, it will switch itself
off automatically after a maximum of
9 hours.
machine is off.
OK sensor.
OK sensor.
39