Warning And Safety Instructions - Miele CVA 5065 User Manual

Warning and Safety instructions

This machine conforms with all
relevant legal safety requirements.
Improper use can, however, lead to
personal injury and damage to
property.
To avoid the risk of accidents and
damage to the machine, please
read these instructions carefully
before using it for the first time.
They contain important notes on the
installation, safety, operation and
care of the machine.
Keep these instructions in a safe
place and pass them on to any
future owner.
Correct application
~
The machine is intended for
domestic use only for the preparation of
espresso, cappuccino, latte macchiato
etc. Any other usage is not supported
by the manufacturer and could be
dangerous. The manufacturer cannot
be held liable for damage resulting
from incorrect or improper use of the
machine.
~
This coffee machine is not intended
for use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience or knowledge, unless they
are supervised whilst using it or have
been shown how to use it correctly by a
person responsible for their safety.
10
Safety with children
~
Keep children away from the
machine at all times. It is not a toy! To
avoid the risk of injury do not allow
children to play on or near it or to play
with its controls. Supervise children
whilst you are using it. Children's skin is
very sensitive, and reacts to hot
temperatures. Danger of scalding.
~
Older children may only use the
coffee machine when its operation has
been clearly explained to them and
they are able to use it safely,
recognising the dangers of misuse.
Remember that coffee and espresso
are not suitable drinks for children.
Technical safety
~
Before setting up the machine,
check it for any externally visible
damage. Never install or attempt to use
a damaged machine. Danger of injury.
~
To avoid the risk of damage to the
machine, make sure that the rating on
the data plate corresponds to the
voltage and frequency of the household
supply, before connecting the machine
to the mains supply. Consult a qualified
electrician if in any doubt.