Cleaning and care
Central spout
^ Pull the central spout down as far as
it will go (a), and pull the cover
forwards to remove it (b).
^ Turn the cover around, push the
insert up and out and then clean both
parts thoroughly.
^ Slide the insert back into the cover
until it clicks into place.
^ Pull the jets out of the central spout.
52
^ Remove the two rubber stoppers,
and manually clean these and the
jets thoroughly.
^ Replace the stoppers.
^ After cleaning, push the jets firmly
back into place on the central spout,
ensuring they are secure.
^ Replace the cover and then push the
central spout back up into position.