Brew Unit - Miele CVA 5065 User Manual

Built-in coffee machine for connection to mains water supply
Table of Contents

Advertisement

Cleaning and care

Brew unit

The brew unit must be cleaned once
a week by hand without using
washing-up liquid, because the
moving parts are lubricated and the
rubber seals could become brittle in
a dishwasher.
^ Remove the water container, waste
container and the coffee chute cover.
^ Press the light coloured button under
the handle of the brew unit a and
whilst doing so turn the handle in the
direction of the arrow b.
^ Press the catch in front of the brew
unit c downwards, and pull the brew
unit carefully out of the machine.
If the brew unit is difficult to remove,
it is not correctly positioned (see
"Problem solving guide").
^ Clean the brew unit thoroughly under
hot running water without using
washing-up liquid.
56
Leave the handle in the same
position, otherwise the brew unit will
be out of alignment and you will not
be able to push it back into the
coffee machine.
^ Wipe any remaining coffee off the two
filters. One filter is located in the
funnel a and the other to the left of
the funnel b.
^ Dry the funnel area a to prevent
ground coffee from sticking to it.
^ Clean the inside of the machine and
remove any coffee residues.
Use your vacuum cleaner to
remove dry ground coffee
residues.
^ Place the brew unit on the guide
runners and, keeping it straight, push
it into the machine.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cva 5060Cva 5068

Table of Contents