Advertisement
CONTROLS AND FEATURES
REAR VIEW
<Rear Panel>
16
To AC outlet
(120 V AC,
For U.S.A. and Canada
50 Hz/60 Hz)
To AC outlet
(230 V AC,
16
50 Hz/60 Hz)
For Europe
16
For the United Kingdom
15
AC inlet [AC IN]
Power input connector. Connect the provided AC power
^
cord
to an AC outlet (120 V AC or 230 V AC,
50 Hz/60 Hz).
6
(cont'd)
15
VIDEO A
IN
OUT
VIDEO B
IN
OUT
AUDIO A
IN
OUT
IN
OUT
AUDIO B
INPUT
ASPECT
REMOTE
16
Power cord
Connects the provided power cord (120 V AC or
%
230 V AC, 50 Hz/60 Hz) to the AC IN connector
.
Caution:
In North America (USA and Canada), this monitor comes
with one power cable. In Europe and the United King-
dom, two power cables are provided (one for use in
continental European countries and the other for the UK).
Be sure to use the power cable that is appropriate for the
AC outlets used in your region. If none of the power
cables provided is suitable, please contact your dealer or
qualified service personnel to obtain the correct type of
power cable.
HOW TO HANDLE BASIC
OPERATIONS
BASIC OPERATION
1. Press the POWER switch to turn on the power.
gON : Power turns ON. (Power indicator: lit)
POWER
GOFF : Power turns OFF. (Power indicator: unlit)
ON
OFF
2. Press the INPUT SELECT buttons to choose input.
Select video/audio signals input to terminals on the rear
panel. The selected button lights in green.
I
A
B
NPUT
Terminals on the rear panel
SELECT
button
Video signal input
INPUT SELECT
1
Input A
VIDEO A terminal
(VIDEO)
2
Input B
VIDEO B terminal
(VIDEO)
3. Press the VOLUME/SELECT buttons to adjust the
speaker volume.
Press this button to display the speaker volume level on the
screen.
VOLUME/SELECT
+ : The Built-in speaker volume is increased. (00 = 50)
– : The Built-in speaker volume is decreased. (50 = 00)
* Screen indication will disappear about 10 seconds after
operating or immediately when you press the MENU button.
PICTURE ADJUSTMENT
1. Press select buttons corresponding to the item
you want to adjust.
The item you select is displayed on the screen.
CHROMA
CONTRAST
1
Phase control
: Press the CHROMA/PHASE button
twice.
2
Chorma control
: Press the CHROMA/PHASE button
PHASE
BRIGHT
once.
3
Brightness control : Press the CONTRAST/BRIGHT button
twice.
4
Contrast control
: Press the CONTRAST/BRIGHT button
once.
2. Adjust with the VOLUME/SELECT buttons.
VOLUME/SELECT button
Items
VOLUME/SELECT
–
PHASE
reddish
(Phase)
CHROMA
lighter
(Chroma)
BRIGHT
darker
(Brightness)
CONTRAST
lower
(Contrast)
* Screen indication will disappear about 10 seconds after operating or
immediately when you press the MENU button.
STATUS indication
(PAL or NTSC)
PAL
About the STATUS indication
● With the COLOR SYSTEM setting set
to AUTO mode, when you turn on the
Audio signal input
power or select inputs, the color
system indication appears for about
AUDIO A terminal
3 seconds on the screen while PAL or
NTSC signals are being detected.
AUDIO B terminal
It does not appear when receiving a
B/W signal or when no signal is input.
Refer to page 8 for more information
about COLOR SYSTEM setting and
page 9 for more information about
STATUS indication setting.
00 ~ 50
VOLUME
:
20
–
+
–20 ~ +20
PHASE
:
00
–
+
Notes:
+
● Phase control is effective only in the
NTSC color system mode.
greenish
● Chroma control is not effective when
receiving B/W or when no signal is
deeper
input.
● When CHROMA is adjusted to "–20,"
the picture becomes less colorful.
brighter
● "NO EFFECT" is displayed (for about
3 seconds) when your selected
higher
function has no effect.
7
Hide quick links:
Advertisement
