How To Use The Menu Functions - JVC TM-A101G Operating Instructions Manual

HOW TO USE THE MENU FUNCTIONS

DISPLAY AND SELECTION IN THE <MENU>
SCREEN MODE (SETTING)
You can set the following menu items.
Set them depending on your needs.
• SHARPNESS • ASPECT RATIO
• COLOR SYSTEM
1. Press the MENU button.
MENU The <MENU> screen is displayed.
2. Press the CHROMA/PHASE or CONTRAST/BRIGHT
button to select MENU items.
A selection mark (4) is put next to the selected item.
CHROMA CONTRAST
Front panel Function
button displayed
PHASE BRIGHT
CHROMA/
PHASE
SHARPNESS
COLOR SYSTEM
CONTRAST/
BRIGHT
ASPECT RATIO
3. Press the VOLUME/SELECT buttons to set.
Front panel Function
VOLUME/SELECT
button displayed
VOLUME/ +
SELECT (+) 4
–
VOLUME/
1
SELECT (–)
Menu items Purpose
SHARPNESS Picture sharpness
COLOR
Color system
SYSTEM
ASPECT RATIO Aspect ratio
4. If you want to set the other menu items, repeat
procedures 2 and 3.
5. Press the MENU button to quit.
Front panel Function
MENU
button displayed
MENU EXIT
8
<MENU> screen
1
< MENU >
‰ SHARPNESS
COLOR SYSTEM
ASPECT RATIO
2
EXIT
CHROMA CONTRAST VOLUME/SELECT
PHASE BRIGHT
<Front panel buttons>
1
Selection mark (4): Indicates the
Contents
menu item you select.
2
Menu item: Menu items you can
Forward selection mark (4)
select.
3
Setting display: Indicates the current
Reverse selection mark (4) settings (value).
4
Function display: The functions of
the front panel buttons (5 buttons on
the left) correspond to the function
displayed.
Function
Contents
displayed
Contents
Forward the menu item.
Increase (to max. value)
Reverse the menu item.
Forward the setting value
– Lower the adjustment
Decrease (to min. value)
value. (to the minimum)
Reverse the setting value
+ Raise the adjustment
value. (to the maximum)
Setting range
4
Forward the setting value.
00 +1 +04 +05
1
Reverse the setting value.
AUTO NTSC PAL
EXIT Exits the <MENU> screen.
4 – 3 16 – 9
Notes:
● When the screen aspect ratio is set to
16 - 9 (16:9) in ASPECT RATIO, the
picture will be vertically reduced.
● When ASPECT REMOTE is set to
ON in the <SET-UP MENU> screen,
REMOTE is displayed in ASPECT
RATIO. ASPECT RATIO cannot be
set in the MENU when ASPECT
REMOTE is ON.
Contents
Quit (or Release) the <MENU>
screen
DISPLAY AND SELECTIONS IN THE <SET-UP
MENU> MODE (SETTING)
: +03 You can set the following set-up menu items.
: AUTO
• H. POSITION
: 4–3
• WHITE BALANCE
3
Note:
● Parameter for H. POSITION can be set separately depending on the video input
4
(Input A (VIDEO) or Input B (VIDEO)) selected by the input select buttons on the front
panel.
Select the required video input with the input select buttons on the front panel in
advance.
MENU
1. While pressing the MENU button, press the
CHROMA/PHASE button.
The <SET-UP MENU> screen is displayed.
CHROMA MENU
PHASE
2. Press the CHROMA/PHASE or CONTRAST/BRIGHT
button to select the desired menu item.
A selection mark (4) is put next to the selected item.
CHROMA CONTRAST
Front panel
button
PHASE BRIGHT
CHROMA/
PHASE
H. POSITION
WHITE BALANCE CONTRAST/
BRIGHT
CONTROL LOCK
STATUS DISPLAY
INPUT REMOTE
ASPECT REMOTE
3. Press the VOLUME/SELECT buttons to set.
Front panel
VOLUME/SELECT button
● To adjust the white balance, select WHITE BALANCE and
● Press the EXIT (MENU) button to return to the <SET-UP
• CONTROL LOCK • INPUT REMOTE
• STATUS DISPLAY • ASPECT REMOTE
Function
Contents
displayed
4
Forward selection mark ( )
4
Reverse selection mark ( )
Function
Contents
displayed
+ Increase (to max. value)
VOLUME/
4
Forward the setting value
SELECT (+)
CUTO Selects CUT OFF setting screen
– Decrease (to min. value)
VOLUME/
1
Reverse the setting value
SELECT (–)
DRV Selects DRIVE setting screen
Notes:
press the VOLUME/SELECT (+) or (–) button to display the
CUT OFF or DRIVE setting screen, then adjust each setting.
MENU> screen.
<SET-UP MENU> screen
1
<SET-UP MENU>
‰ H. POSITION
: 00
WHITE BALANCE
CONTROL LOCK : OFF
STATUS DISPLAY : ON
INPUT REMOTE : OFF
ASPECT REMOTE : OFF
3
2
4
EXIT
CHROMA CONTRAST VOLUME/SELECT MENU
PHASE BRIGHT
<Front panel buttons>
1
Selection mark (4): Indicates the
menu item you select.
2
Menu item: Menu items you can
select.
3
Setting display: Indicates the
current settings (value).
4
Function display: The functions of
the front panel buttons (5 buttons
on the left) correspond to the
function displayed.
Function
Contents
displayed
Forward the menu item.
Reverse the menu item.
– Lower the adjustment
value. (to the minimum)
+ Raise the adjustment
value. (to the maximum)
4
Forward the setting value.
1
Reverse the setting value.
Exit the <SET-UP MENU>
EXIT
screen. (release)
DRV Selects DRIVE adjustment.
Selects CUT OFF
CUTO
adjustment.
Adjusts red and blue
RB
signal level.
Adjusts red, green and
RGB
blue signal level.
Turns the ON-SCREEN
display on or off. (This
DISP function is effective only
in the DRIVE or CUT OFF
adjustment mode.)
9