How To Handle Basic Operations - JVC TM-H1700GU - Color Monitor Instructions Manual

HOW TO HANDLE BASIC
OPERATIONS
BASIC OPERATION
1. Press the main power switch to turn on the power.
2. Press the POWER switch to turn on the power.
ON : Power turns ON. (Power indicator: lit)
POWER
OFF : Power turns OFF. (Power indicator: unlit)
3. Press the INPUT SELECT buttons to choose input.
Select video/audio signals input to terminals on the rear
panel. The selected button lights in green.
A B
INPUT SELECT
Note:The Y/C (S-video) terminal has priority.
4. Press the VOLUME/SELECT buttons to adjust the
speaker volume.
VOLUME/SELECT
PICTURE ADJUSTMENT
1. Press select buttons corresponding to the item
you want to adjust.
The item you select is displayed on the screen.
CHROMA CONTRAST
1
2
3
PHASE BRIGHT
4
* Pressing the CHROMA/PHASE button and CONTRAST/BRIGHT button
2. Adjust with the VOLUME/SELECT buttons.
VOLUME/SELECT
* Screen indication will disappear about 10 seconds after operating.
* The on-screen display goes off when you press MENU button.
Green: The main power is ON, and the monitor's
power is ON (in the normal operation mode).
Orange : The main power is ON, but the monitor's
power is OFF (in the standby mode)
Unlit : The main power is OFF.
INPUT
Terminals on the rear panel
SELECT
buttons Video signal input
1
Input A
VIDEO A terminal
(VIDEO)
2
Input B VIDEO B terminal
(VIDEO Y/C)
VIDEO B (Y/C) terminal
Press this button to display the speaker volume level on the
screen.
+ : The Built-in speaker volume is increased. (00
– : The Built-in speaker volume is decreased. (50
* Screen indication will disappear about 10 seconds after operating.
* The on-screen display goes off when you press MENU button.
Chroma control : Press the CHROMA/PHASE button once.
Phase control : Press the CHROMA/PHASE button twice.
Contrast control : Press the CONTRAST/BRIGHT button once.
Brightness control : Press the CONTRAST/BRIGHT button twice.
alternately while the item is shown on screen restores the previous status.
When no item is shown on screen, CHROMA and CONTRAST have priority.
VOLUME/SELECT button
Items
–
CHROMA
lighter
(Chroma)
PHASE
reddish
(Phase)
CONTRAST
lower
(Contrast)
BRIGHT
darker
(Brightness)
About the STATUS indication
● With the COLOR SYSTEM setting set
Audio signal input
AUDIO A terminal
Refer to page 9 for more information
AUDIO B terminal
[ 50)
[ 00)
● Phase control is effective only in the
+
● Chroma control is not effective when
deeper
● When CHROMA is adjusted to "–40,"
greenish
● "NO EFFECT" is displayed (for about
higher
● To change the display position on
brighter
STATUS indication
(PAL or NTSC)
PAL
to AUTO mode, when you turn on the
power or select inputs, the color
system indication appears for about
3 seconds on the screen while PAL or
NTSC signals are being detected.
It does not appear when receiving a
B/W signal or when no signal is input.
about COLOR SYSTEM setting and
page 10 for more information about
STATUS indication setting.
00 ~ 50
VOLUME : 20
+
–
UPPER
–40 ~ +40
PHASE : 00
PHASE : 00
+
–
Notes:
LOWER
NTSC color system mode.
receiving B/W or when no signal is
input.
the picture becomes less colorful.
3 seconds) when your selected
function has no effect.
screen, set UPPER or LOWER with
ADJ. BAR POSI.
7