How To Handle Basic Operations - JVC TM-H1700G/E Operating Instructions Manual

CONTROLS AND FEATURES
REAR VIEW
<Rear Panel>
19
To AC outlet
(120 V AC,
For U.S.A. and Canada
50 Hz/60 Hz)
To AC outlet
(230 V AC,
19
50 Hz/60 Hz)
For Europe
19
For the United Kingdom
Main power switch
17
Press the switch to turn the main power ON or OFF. When
the main power is ON, the power lamp on the front panel
lights in orange and the monitor enters the stand-by
mode.
I : ON : OFF
18 AC inlet [AC IN]
Power input connector. Connect the provided AC power
(
cord to an AC outlet (120 V AC or 230 V AC,
50 Hz/60 Hz).
6
(cont'd)
REMOTE
VIDEO A
IN OUT
VIDEO B
IN OUT
IN Y/C
OUT
AUDIO A
IN OUT
AUDIO B
IN OUT
18
17
19 Power cord
Connects the provided power cord (120 V AC or
*
230 V AC, 50 Hz/60 Hz) to the AC IN connector .
Caution:
In North America (USA and Canada), this monitor comes
with one power cable. In Europe and the United King-
dom, two power cables are provided (one for use in
continental European countries and the other for the UK).
Be sure to use the power cable that is appropriate for the
AC outlets used in your region. If none of the power
cables provided is suitable, please contact your dealer or
qualified service personnel to obtain the correct type of
power cable.
HOW TO HANDLE BASIC
OPERATIONS
BASIC OPERATION
1. Press the MAIN POWER switch to turn on the
power.
2. Press the POWER switch to turn on the power.
ON : Power turns ON. (Power indicator: lit)
Green: The main power is ON, and the monitor's
POWER
power is ON (in the normal operation mode).
OFF : Power turns OFF. (Power indicator: unlit)
Orange : The main power is ON, but the monitor's
power is OFF (in the standby mode)
Unlit : The main power is OFF.
3. Press the INPUT SELECT buttons to choose input.
Select video/audio signals input to terminals on the rear
panel. The selected button lights in green.
A B
INPUT
Terminals on the rear panel
SELECT
INPUT SELECT
Video signal input
buttons
1
Input A
VIDEO A terminal
(VIDEO)
2
Input B VIDEO B terminal
(VIDEO Y/C)
VIDEO B (Y/C) terminal
Note:The Y/C (S-video) terminal has priority.
4. Press the VOLUME/SELECT buttons to adjust the
speaker volume.
Press this button to display the speaker volume level on the
VOLUME/SELECT
screen.
+ : The Built-in speaker volume is increased. (00 = 50)
– : The Built-in speaker volume is decreased. (50 = 00)
* Screen indication will disappear about 10 seconds after operating.
* The on-screen display goes off when you press MENU button.
PICTURE ADJUSTMENT
1. Press select buttons corresponding to the item
you want to adjust.
The item you select is displayed on the screen.
CHROMA CONTRAST
1
Chroma control : Press the CHROMA/PHASE button once.
2
Phase control : Press the CHROMA/PHASE button twice.
3
Contrast control : Press the CONTRAST/BRIGHT button once.
PHASE BRIGHT
4
Brightness control : Press the CONTRAST/BRIGHT button twice.
* Pressing the CHROMA/PHASE button and CONTRAST/BRIGHT button
alternately while the item is shown on screen restores the previous status.
When no item is shown on screen, CHROMA and CONTRAST have priority.
2. Adjust with the VOLUME/SELECT buttons.
VOLUME/SELECT button
Items
VOLUME/SELECT
–
CHROMA
lighter
(Chroma)
PHASE
reddish
(Phase)
CONTRAST
lower
(Contrast)
BRIGHT
darker
(Brightness)
* Screen indication will disappear about 10 seconds after operating.
* The on-screen display goes off when you press MENU button.
STATUS indication
(PAL or NTSC)
PAL
About the STATUS indication
● With the COLOR SYSTEM setting set
to AUTO mode, when you turn on the
power or select inputs, the color
system indication appears for about
3 seconds on the screen while PAL or
NTSC signals are being detected.
Audio signal input
It does not appear when receiving a
B/W signal or when no signal is input.
AUDIO A terminal
Refer to page 9 for more information
about COLOR SYSTEM setting and
AUDIO B terminal
page 10 for more information about
STATUS indication setting.
00 ~ 50
VOLUME : 20
– +
UPPER
–40 ~ +40
PHASE : 00
PHASE : 00
+
–
Notes:
LOWER
● Phase control is effective only in the
NTSC color system mode.
+
● Chroma control is not effective when
receiving B/W or when no signal is
deeper
input.
● When CHROMA is adjusted to "–40,"
greenish
the picture becomes less colorful.
● "NO EFFECT" is displayed (for about
higher
3 seconds) when your selected
function has no effect.
● To change the display position on
brighter
screen, set UPPER or LOWER with
ADJ. BAR POSI.
7