Controls And Features - JVC TM-1011G Instructions Manual

Controls and Features

7 Front Panel
1
2
1 Tally lamp
This lamp is controlled by the tally function of the
MAKE/TRIGGER terminal.
☞ "How to Use the MAKE/TRIGGER Terminal" on pages
14 and 15
• You can set the lamp color to red or green.
☞ "TALLY SELECT" on page 12
2 CHROMA (
)/PHASE (
Activates the Chroma (picture color density)
adjustment mode or the Phase (picture hue)
adjustment mode. Each time you press the button,
the adjustment modes change.
To adjust the value, move the MENU/VOLUME control
(4) to / .
NOTES:
• CHROMA is not adjustable when the B/W (50 Hz/60 Hz)
signal is input.
• PHASE is not adjustable when the PAL signal or the B/W
(50 Hz/60 Hz) signal is input.
3 CONTRAST (
)/BRIGHT (
Activates the picture contrast adjustment mode or
picture brightness adjustment mode. Each time you
press the button, the adjustment modes change.
To adjust the value, move the MENU/VOLUME control
(4) to / .
4
4
3 5 6
) button
) button
7 8
4 MENU/VOLUME control
• Adjusts the volume level by
moving the control to
• Displays or closes a menu screen
by pushing in the control.
• Turns off/on the sound each time
moving the control to
menu screen is displayed.
While a menu screen is displayed,
selects or adjusts the menu items
by moving the control to
☞ "Basic Menu Operations" on pages 8
and 9
To display the SET-UP MENU:
Press the CHROMA/PHASE button (2) while
moving the MENU/VOLUME control to
9 p q
/ .
when no
/ / / .
.