Table of Contents
Advertisement
7 BLUE CUTOFF
Adjusts the blue cut-off point.
• MIN O MAX (in 155 grades)
7 RED CUTOFF
Adjusts the red cut-off point.
• MIN O MAX (in 155 grades)
SIZE/POSI. ADJ.
7 H. SIZE
Adjusts the horizontal screen size.
• –20 O 00 O +20 (*)
–:
Reduces the screen size horizontally.
+:
Enlarges the screen size horizontally.
* You can adjust this item with in the range between 00
and +20 during the under-scan mode.
7 H. POSITION
Adjusts the horizontal screen position.
• –20 O 00 O +20
–:
Moves the screen to the left.
+:
Moves the screen to the right.
7 V. SIZE
Adjusts the vertical screen size.
• –20 O 00 O +20
–:
Reduces the screen size vertically.
+:
Enlarges the screen size vertically.
7 V. POSITION
Adjusts the vertical screen position.
• –10 O 00 O +10
–:
Moves the screen down.
+:
Moves the screen up.
DISTORTION ADJ.
7 PARALLELOGRAM
Compensates the parallelogram picture distortion.
• –20 O 00 O +20
–:
Moves the upper side of the picture to the
right, and the lower side to the left.
+:
Moves the upper side of the picture to the
left, and the lower side to the right.
Adjusts the size and
position of the picture.
Compensates the picture
distortion.
Also compensates the
picture tilt which is caused
by geomagnetic influence.
7 TRAPEZOID
Compensates the trapezoid picture distortion.
• –20 O 00 O +20
–:
Enlarges the upper side of the picture.
+:
Reduces the upper side of the picture.
7 ROTATION
Compensates a picture tilt.
• –31 O 00 O +31
–:
Turns the picture clockwise.
+:
Turns the picture counterclockwise.
STATUS DISPLAY
7 STATUS DISPLAY
Sets the status display.
• AUTO/MANUAL/OFF
☞ "About the status display" on page 5
CONTROL LOCK
Prohibits altering the monitor operations except turning
the monitor on/off and deactivating this function.
• ON/OFF
NOTES:
• When "CONTROL LOCK" is set to "ON," "
on!" appears on the screen if you try to operate the monitor.
• Operating the monitor by the external control is available if
this function is activated.
all reset
Resets all the settings you have made to factory-preset
values.
• Adjustments made by using the front panel buttons
will also be reset.
1. Move the MENU/VOLUME control to
select "all reset," then move it to
Confirmation message is displayed.
2. To initialize, move the MENU/VOLUME control
to
.
• To cancel the initialization, press the MENU/
VOLUME control.
Sets the item related to
turning on/off the status
display.
Control lock
/
to
.
13
Hide quick links:
Advertisement
Table of Contents
