Basic Menu Operations - JVC TM-1011G Instructions Manual

Basic Menu Operations

7About the Menu Screens
This monitor features MAIN MENU which contains the functions normally used and SET-UP MENU which contains
the initial settings of the monitor.
MAIN MENU
Items
APERTURE CONTROL
sub menu SELECT
ASPECT
SET-UP MENU
Items
FUNCTION SETTING
PICTURE SUB ADJ.
COLOR TEMP./BAL.
SIZE/POSI. ADJ.
DISTORTION ADJ.
STATUS DISPLAY
CONTROL LOCK
all reset
NOTE:
• Some items do not appear on the menu depending on the signal currently input or if there is no signal input. Those items are
not available to use.
7Buttons for Menu Operations
8
Functions
Compensates the frequency characteristics of the luminance signal of a video signal.
Selects the positions and the contents of the sub-menu display.
Selects the aspect ratio.
Functions
Sets the control systems for the COLOR SYSTEM, colors of the tally lamp, and MAKE/TRIGGER
terminal.
• Can be also used to check the amount of time that the monitor has been used.
The standard value ("00") of the picture adjustment is initially set at the factory. You can adjust the
standard value as you want.
Sets or adjusts the color temperature and white balance.
Adjusts the size and position of the picture.
Compensates the picture distortion. Also compensates the picture tilt which is caused by geomagnetic
influence.
Sets the item related to turning on/off the status display.
Prohibits altering the monitor operations except turning the monitor on/off and deactivating this
function.
• Operating the monitor by the external control is available if this function is activated.
Resets all the settings you have made to factory-preset values.
• Adjustments made by using the front panel buttons will also be reset.
CHROMA/PHASE button
To display SET-UP MENU, press
the CHROMA/PHASE button
while moving the MENU/VOLUME
control to .
MENU/VOLUME control
Displays or closes a menu
screen by pushing in the control.
While a menu screen is
displayed, selects or adjusts the
menu items by moving the
control to / / / .