Switching On/Off Line-Of-Sight Error Correction - Leica T105 User Manual

Switching on/off line-of-sight error correction

8 The T105/T110 can correct the line-
of-sight error (Hz-collimation)
automatically. This setting can only
12
be changed via the configuration
menu.
15
If option "Line-of-sight error
correction ON" is active, each
measured Hz-angle is corrected
(depending on V-angle).
For normal operation the line-of-sight
error correction remains switched on.
Configuration
C
1. Scroll to symbol /
C
C
2. Select desired option with
3. Confirm setting with
Possible settings:
The line-of-sight error
C
correction is switched ON.
The line-of-sight error
C
correction is switched OFF.
38
By measuring in both faces
C
the line-of-sight error is
eliminated.
Find more information about
the Hz-collimation in chapter
C
"Determining instrument
errors".
T105/T110-1.3.0en