Setting V-angle
8
The "0"- orientation of the vertical
circle can be either selected for the
zenith or the horizontal plane.
12
1. Scroll to symbol
15
2. Select desired option with
3. Confirm selection with
The setting is valid for all
angle units and can only be
changed via the configuration
menu.
Configuration
V-angle "0" for the horizontal
plane
/
.
V-angles above the horizontal plane
are indicated as positive values and
below the horizontal plane as negati-
ve values. Up to the maximum value
of 180° (200 gon) the V-angle
decreases/increases.
:
32
V-angle "0" for the zenith
The V-anlge increases from 0° - 360°
(0 - 400 gon).
T105/T110-1.3.0en
: