Unit Parts Identification - Kelvinator KWH20HRB User Manual

UNIT PARTS IDENTIFICATION

1. Power cord conductors are distinguished according to color as follows (see Fig.1)
2. For your safety and protection, this unit is earthed through the power cord (see Fig.2)
Please contact the manufacturer or its service agent or a similar qualified person if
you want to replace it.
3. Be sure that the unit being correctly grounded. The wall outlet (Air-break switch)should be
provided with reliable earth wire.
4. The unit should be provided with an individual circuit and the circuit breaker/fuse
rating should be the same as that of the power cord and wall outlet.
POWER
CORD
E-Earth wire, yellow/green
N-Neutral wire, blue
A-Active wire, brown
Wall outlet
A
E
N
Fig.1
5
1. Front panel
2. Air filter
3. Frame
4. Cabinet
5. Air inlet grille (outdoor side)
6. Air outlet grille
7. Electronic control keypad
8. Power supply cord and plug
9. Remote control
Air-break switch
Fig. 2