Advertisement
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
WINDOW/WALL (ELECTRONIC) - H TYPE
ROOM AIR CONDITIONER
ISSUE: 2 DATE: 11/08/10
O
C
TIMER
SWING
POWER
SWING
AUTO
SLEEP
TEMP
HEAT
FAN
MODE
HIGH
COOL
MED
LOW
DRY
FAN
Cooling & Heating type
KWH20HRB
KWH26CRB
KWH26HRB
KWH39CRB
KWH39HRB
Refrigerant R410A
P/No. 2020214A0822
Advertisement
Need help?
Do you have a question about the KWH20HRB and is the answer not in the manual?
Questions and answers
Why does it not start and screen not working but it beeps contually when I plug it in
The Kelvinator KWH20HRB may not start and could have a non-working screen while beeping continuously due to the following possible causes:
1. Unplugged Unit – Ensure the air conditioner plug is fully inserted into the power outlet and switched on.
2. Blown Fuse or Tripped Circuit Breaker – Check the house fuse or circuit breaker box and replace the fuse or reset the breaker if necessary.
3. Power Failure – If a power failure has occurred, switch off and unplug the unit. After power is restored, reconnect the power cord, switch on the unit, and wait 3 minutes before restarting.
4. Temperature Sensor Malfunction – A malfunctioning temperature sensor may cause the unit to beep. Turn off the unit, check for obstructions, restart it, and if the issue persists, unplug the power cord and contact the manufacturer or a qualified service agent.
If the issue continues, professional service may be required.
This answer is automatically generated
@Mr. Anderson I can not find a fuse box for the air conditioner