Download Print this page

Specifications - NightWatcher NW1201X Installation & Operating Manual

Motion tracking sensor led light

Advertisement

INTRODUCTION
Congratulations on the purchase of your new Nightwatcher Security Light. Before installation of
the unit, please read the operating instructions and safeguards carefully. It is important that you
read and follow the instructions in the manual, even if you feel you are familiar with this type of
product.
Please retain the instructions in a safe place for future reference

SPECIFICATIONS

IMPORTANT SAFEGUARDS
WHEN USING ELECTRICAL APPLIANCES, IN ORDER TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK, AND/OR INJURY, THESE BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED:
General information and SAFETY
Read all instructions carefully, even if you feel you are quite familiar with the appliance.
Any alterations or additions to building wiring, must be completed by a licensed electrical
mechanic, or person authorised by legislation to work on the fixed wiring of any electrical
installation
To prevent electric shock, please ensure that power is disconnected before installing.
The appliance is not intended for use by children or infirm persons without supervision.
Children should be supervised to ensure that they do not play with the appliance.
This unit must be connected to a 220-240V 50Hz power source
The light must be earthed
The cable installed shall be 3 x 1.0mm² at least
The unit is for outdoor use only
The unit is for wall mounting
The NW Surveillance Pro is designed to be weather resistant. Never attempt to immerse the unit in
water or any other liquid. This will damage the unit and void the warranty.
This product is designed to illuminate, video, and make verbal announcements. It will not prevent
the commission of any act, legal or illegal. The manufacturer assumes no liability for any damage
to property, injury to person, or death.
COMPULSORY WARNING
Note: No user serviceable parts inside. Unauthorised modification voids warranty, Return to place of
purchase for replacement or service under warranty.
SAVE THESE INSTRUCTIONS
Model Number: NW1200x
AC Input: 220-240V 50Hz
Time Adjustment: Fixed at 3 Minutes
Sensor Range: 10m x 210°
Power Consumption: 8 Watts
IP Weather Rating: IP55
Light Source: 8 x 1Watt Nichia High Power L.E.D
Camera (Video): 20 seconds image recording for image stream:
Camera (Photo) 640 x 480 – JPEG format
Camera Viewing Distance – 8M, Angle – 60 Degree
Motor Life 20,000 revolutions
10fps at 480x640 Pixels – AVI format
3

Advertisement

loading