Advertisement
Camera LED for indicating the function status of the unit by different color LED lights.
1) Red： Micro SD card (part no.②) is not inserted into the Micro SD slot or the system is
malfunctioning.
2) Green： The unit is recording.
3) LED off: stand by Micro SD card is inserted into the slot）, when OFF/REC button is
pressed.
* Before removing Micro SD card from the slot, please press the push-button on the
bottom of the Smart Tracker for 3 seconds to stop the light turning. To resume to work,
push the push-button again.
* Please note when OFF/REC button is pressed, remove Micro SD card (part no.②)
within 30 seconds (now the LED will turn red after Micro SD card is removed from the
slot)
Reset button： restore functions to default settings
1) Press RESET button once each time you turn on unit.
2) Please press this button in case of system malfunction.
Off/Rec：Please press OFF/REC button to remove Micro SD card. Please remove card
within 30 seconds of pressing the OFF/REC button to avoid loss of data.
Audio mode: for selecting which audio message will play when motion sensor detects
movement.
- Pre-set default is "silent mode"
- Push one time for "doorbell chime"
- Push again for "dog barking"
- Push one more time for the message you recorded (Message 1)
- Push again for additional message you recorded (Message 2 - you can record up to 2
messages at a time)
OFF/REC
TIME/DATE SET
Fig. 9
Step 4. Recording Audio Messages (see fig. 10)
1. Press the SET/REC button for 3 seconds, and you will hear a single beep. After the beep,
start recording your message by talking into the microphone (see fig. 10). Push the button
again to stop recording, and you will hear a series of 2 beeps, meaning the recording is
finished. If you do not push the button again after you have recorded the message, the
recording will stop automatically after 10 seconds.
2. Smart Tracker can hold 2 self-recorded messages. If you have recorded one message,
repeat above step for message 2.
2. If you hear a series of 3 beeps when you want to record your message by pressing
the SET/REC button for 3 seconds, this means the self-recorded messages are full,
please erase previous messages.
RESET
PLAY/ERASE
this
Fig. 10
Fig. 8
8
Advertisement
