Advertisement
Play/Erase : allows you to listen to and erase messages
i.
If you have only recorded 1 message, push the button one
recorded Message 1. If you wish to erase it, press the PLAY/ERASE button and hold it
for 3 seconds.
erased.
ii. If you have recorded 2 messages, push the button one time to listen to the first
message, and push it again to listen to the second message. If you want to erase a
message, select that message, and after listening to it, push the
PLAY/ERASE button and hold it for 3 seconds to erase it.
iii. If message 1 is erased, message 2 will automatically become message 1.
The next message you record will then become the new message 2.
Step 5. Set the Data and Time：
This will allow the security video taken by NW Surveillance Pro to display the correct date
and time it was taken.
1. Push TIME/DATE SET button (see fig. 11) for 3 seconds, LCD screen will flash 3 times
indicating you have entered Time/Date
1. "YEAR "setting： ： ： ： "Y" and "08" displayed on the screen；push the button to set year from"08-
99", push the button again and hold for 3 seconds to scroll through numbers quickly. If you
have not pressed the button for 3 seconds, it will automatically save the year and go on to
allow you to set the month.
2. Repeat the same setting procedure for
"VIDEO/PHOTO "setting： ： ： ：
1.
and "V" appear on the screen push the button to choose"V"（Video or"P"（Photo）.
If you have not pushed any buttons for 3 second, "OK" will appear on the screen, indicating it
has automatically saved the current settings. The LCD screen will shut off automatically 10
seconds later.
* On the"P" (photo) setting, Smart Tracker will take a series of digital photographs at a rate of 3
photos every second when the motion sensor is triggered
①
③
⑤
⑦
You will hear a series of 2 beeps, indicating the message has been
when entering this mode, these two icon
②
Start
④
MONTH
Setting
⑥
HOUR
Setting
VIDEO/
⑧
PHOTO
Setting
TIME/DATE SET
OFF/REC
LCD
Fig. 11
MONTH/DATE/HOUR/MINUTE.
YEAR
Setting
DATE
Setting
MINUTE
Setting
Finish
(see fig. 10)
time to listen to
setting mode.
9
Advertisement
