Table of Contents
Advertisement
Sensor Reheat
Sensor Reheat
The Sensor Cooking features enable you to cook a variety of foods without having to select the power level or
cooking time as the foods are automatically cooked by detecting a build-up of steam on the humidity sensor. As
foods cook in a microwave, steam is produced. When foods are covered, the steam will build up and escape
from the dish and burst. This burst of steam is detected by the humidity sensor and then the oven automatically
calculate the remaining cooking time.Food being reheated should weigh between 100 g and 600 kg. Foods
weighing less than 100 g and more than 600g, use a manual micro power setting.
1
2
Note:When Sensor indicator blinks, do not open the door to interrupt normal work.
※ " "indicates the icon is blinking.
注：
1. This program is suitable for reheating rice and meal, add some water in the rice and stir the meal
before reheating.Food should always be covered loosely, but completely, with plastic warp. (Do
not use any snap closing lids.)
2. This programme is not applicable to reheated liquid, frozen food, high density food and high fat food etc.
3. When it is too hot in the oven cavity, the display window will display "
be conducted until "
used.
4. Be sure the glass tray, the outside of the cooking containers and the inside of the microwave are
dry before placing food in the oven. Residual beads of moisture turning into steam can mislead the
sensor.
5. All food should have a covered stand time of at least 3 to 5 minutes.
Press once
press [Set/Start] pad to cook
" disappears.If room temperature is above 35 °C, sensor reheat feature can not be
". At this time, this feature cannot
23
Hide quick links:
Advertisement
Table of Contents
