Table of Contents
Advertisement
1.3 Model Specifications
The media converter series provides the following fiber options:
Model Ext.
Connector Wavelength
-T
Duplex ST 1310nm
-C
Duplex SC 1310nm
-SL2
Duplex SC 1310nm
-SL3
Duplex SC 1310nm
-SL6
Duplex SC 1310nm
-W3515
BiDi SC
-W5315
BiDi SC
1.4 Special Functions
Auto MDI/MDI-X Function
This function allows the TP port to auto-detect the twisted-pair signals and adapts itself to form a valid MDI to
MDI-X connection with the remote connected device automatically.
Auto-negotiation Function
The copper port is featured with auto-negotiation function and full capability in speed and duplex. It performs a
negotiation process for the speed and duplex configuration with the connected device automatically when each
time a link is being established.
Far End Fault Function
The FX port is facilitated with this function that conforms to IEEE 802.3u 100BASE-FX specifications. When
the FX port detects a link failure on its receiving circuitry, it will send out an FEFI (Far End Fault Indication)
signal to the remote connected device to indicate a remote fault is detected. It also is capable to receive FEFI
signal sent from the remote link partner. Upon receiving an FEFI signal, it notes a link failure occurred on the
transmitting path. This function allows the converter to report a fiber link fault even when a link failure
occurred on transmitting fiber cable.
Fiber Distance
MMF 2km
MMF 2km
SMF 20km
SMF 30km
SMF 60km
Tx 1310nm
SMF 15-20km
Rx 1550nm
Tx 1550nm
SMF 15-20km
Rx 1310nm
Tx power Sensitivity
-20 ~ -14
-20 ~ -14
-15 ~ -8
-15 ~ -8
-5 ~ -0
-14 ~ -8
-14 ~ -8
-11-
Rx Power max.
-32 max.
-8 min.
-31 max.
0 min.
-30 max.
-7 min.
-34 max.
0 min.
-35 max.
0 min.
-31 max.
0 min.
-31 max.
0 min.
Advertisement
Table of Contents
