Aud(Io)1 Lang(Uage) And Aud(Io)2 Lang(Uage) Menus - Motorola DSR4410 Operator's Manual

3
and leave it unchanged. Otherwise, press the Enter button to proceed.
• A warning message is displayed when a MPEG program number is selected which does
not exist.
Press a directional (3456) button to back out of the field and leave it unchanged.
Otherwise, press the Enter button to proceed.

Aud(io)1 Lang(uage) and Aud(io)2 Lang(uage) Menus

These menus have three fields that allow the user to modify and view the status of the
language for the Audio1 and Auido2 outputs. This menu also allows the user to view the
mode of the audio signal as it is received from the programmer and before any subsequent
down mixing that the unit may perform. Press the56buttons until the Audio1 Language
menu or Audio2 Language menu appears.
NOTE: The two digits in the Left, Right fields indicate the occurrence of the specified
language. The range is between 00 and 99. For example, "Eng13" for the 13th version of
English. This feature is used when there are multiple dialects within a language.
Display (Dspl) Field
Press the4button until the cursor is at the Display label, and press the Enter button to
move into the field. The Display field allows the user to select the options that are
displayed in the Left (channel) and Right (channel) fields. There are three options: All,
Avail, and Status. Press the56buttons to display the options.
The All option allows the user to scroll throughout the languages that exist in the database
while in the Left and Right fields. You may wish to select languages that are not functional
at this time but will be functional in the future - when they are present on the channel. Press
the Enter button to confirm the selection.
34
CAUTION: Program ddddd does not exist
Press E to continue or
AUD1LANG Dspl Left
E Avail eng00
AUD2LANG Dspl Left
E Avail spa00
to stop
Right InputMode
eng00 Stereo
Right InputMode
Fre00 Dual Mono