How To Use The Menus; Group 1 Menus: Installation - Motorola DSR4410 Operator's Manual

How To Use The Menus

About Menu
The front panel LCD will display the About menu when the unit is plugged in or after
factory reset. This menu identifies the unit model ("MOTOROLA DSR4410") and the
software version that is currently installed.
This menu is displayed for only 30 seconds, after which the front panel LCD will display
the Main menu.
Main Menu
This menu is the top-level menu and can be arrived at from any other menu by pressing the
Enter button while the cursor is blinking next to the menu name. This menu allows the user
to select any one of the four main menu groups: installation menus, channel selection
menus, status menus, and diagnostic menus.
The unit allows the user to scroll only to menus that are in the same group. To scroll to a
menu that is in a different menu group, the user must first return to the main top-level
menu and then select the applicable menu group.

Group 1 Menus: Installation

The purpose of the installation menus is to configure the ports and choose settings that will
remain fixed over a period of time. These settings include video output format, audio
output format, Ethernet port addresses, and bypass mode operation. This section describes
in detail each of the installation menus, fields, and options displayed on the LCD panel.
Installation Menu
Return to the main top-level menu and then select the applicable menu group.
DSR4410
MOTOROLA DSR4410
Version 0x148.31
DSR-4410
E Install Channel Status Diag
Operating the DSR4410
13