Removing The Broiler Glides - Whirlpool SF3000SE W Service Manual

REMOVING THE BROILER GLIDES

WARNING
Electrical Shock Hazard
Disconnect from electrical supply before servic-
ing unit.
Failure to do so could result in death or electrical
shock.
CAUTION: When you work on the gas range, be
careful when handling the sheet metal parts. Sharp
edges may be present, and you can cut yourself if
you are not careful.
1.
2.
3.
4.
5.
BROILER
CARRIAGE
BROILER
DOOR
3-31
Cooking Products Service Manual
Original July, 1996
© 1996 Whirlpool Corporation
Turn off the gas to the range and disconnect
the power cord from the wall outlet.
Slide out the broiler and remove it from the
range.
To replace a defective broiler glide, remove
the screw from the old glide, remove the glide,
and replace it with a new one.
To replace a defective forward glide, remove
the screw from the old glide, slide the old glide
off the rail, and replace it with a new one.
Reinstall the broiler in the range and make
sure that it operates smoothly.
FORWARD BROILER
GLIDES
SPRING
BRACKET
BROILER
GLIDE
GLIDE
RAIL
4321890
Page 3-31