Oven Temperature Calibration (Electronic Oven Controls) - Whirlpool SF3000SE W Service Manual

OVEN TEMPERATURE CALIBRATION
(ELECTRONIC OVEN CONTROLS)
The oven temperature is factory-calibrated.
The calibration temperature can be increased
to a maximum 35˚, in 5˚ increments. To change
the calibration temperature,perform the fol-
lowing steps.
1. Touch and hold the BAKE keypad for
4-seconds, and the display will indicate
the present "oven calibration" tempera-
ture.
2. Touch the BAKE keypad until the display
increases by 5˚, then remove your finger
from the keypad for 1-second. To con-
Cooking Products Service Manual
Original July, 1996
© 1996 Whirlpool Corporation
tinue increasing the temperature in 5˚
increments, touch and release the key-
pad in 1-second intervals, until the de-
sired temperature is reached (up to +35˚).
3. To decrease the calibration temperature
from the maximum setting, press and re-
lease the BAKE keypad in 1-second inter-
vals. The readings will change to –35˚, and
decrease to 0, or its original temperature
setting. The cycle will then start over.
4. To exit the "temperature calibration" mode,
press the CANCEL/OFF keypad.
4-11
4321890
Page 4-11