Related Manuals for Mytee Carpet Shark CRB3010
Summary of Contents for Mytee Carpet Shark CRB3010
- Page 1 User Manual Carpet Shark Model: ™ CRB3010, CRB3017 REV. 1/30/20 13655 Stowe Dr. Poway, CA 92064 P: (858) 679-1191 F: (858) 726-6005 www.mytee.com...
- Page 2 Congratulations on the purchase of your new Carpet Shark™ Counter Rotating Brush. As technology continues to develop you can work confidently knowing that both Mytee Products and its employees are equally dedicated to develop- ing with the industry and its advances.
-
Page 3: Table Of Contents
Table of Contents Important Safety Information At a Glance 1.1 - Technical Specifications 1.2 - Included with the Carpet Shark™ 1.3 - Carpet Shark™ Front View 1.4 - Carpet Shark™ Rear View Machine Operation 2.1 - Powering the Carpet Shark™ 2.2 - Attaching Accessories 2.3 - Switching Out Brushes 2.4 - Operating the Carpet Shark™... -
Page 4: Important Safety Information
This machine must be grounded. If it should malfunction or When and if calling Mytee for support, please have your break down, grounding provides a path of least resistance Model and Serial Number available for faster assistance. - Page 5 Important Safety Information 3. Always unplug power cord from electrical outlet before attempting any adjustments or repairs. 4. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. 5. Do not pull or carry by cord. Do not close a door on cord or pull cord around sharp edges or corners.
-
Page 6: At A Glance
1 - At a Glance 1.1 - Technical Specifications CRB3010 10” Carpet Shark™ CRB3017 17” Carpet Shark™ Drive System Dual motors, belt-driven brushes Drive System Dual motors, belt-driven brushes (With handle at full height) 9" x 17" x (With handle at full height) 9" x 11.75" Dimensions Dimensions 47.5"... -
Page 7: Carpet Shark™ Front View
1 - At a Glance 1.3 - Carpet Shark™ Front View 1. Push Handle 3. Storage Tray 2. Renovator Attachment (included) 4. Side Access Panel... -
Page 8: Carpet Shark™ Rear View
1 - At a Glance 1.4 - Carpet Shark™ Rear View 1. Power Switch 2. Wheel Attachment (included) -
Page 9: Machine Operation
2 - Machine Operation 2.1 - Powering the 2.3 - Switching Out Brushes Carpet Shark™ The Carpet Shark™ requires a 15 amp, 115V power outlet to operate. Plug the female end of the lighted extension cord into the Carpet Shark’s™ pigtail power cord and plug the male end of the extension cord into a wall outlet. -
Page 10: Storage
2 - Machine Operation 2.5 - Storage After use, make sure any attachments are emptied and cleaned, wipe down the machine, and make sure the brushes are free of debris. Place on the storage tray and store in a cool, dry place. ♦... -
Page 11: Machine Maintenance
In order to keep the Carpet Shark™ running smoothly and reduce the risk of damage to the machine and subsequent sure the belts don’t slip. downtime, Mytee recommends following the maintenance 5. Replace the black side access panel. schedule below: ♦... - Page 12 NOTES Mytee Products, Inc. 13655 Stowe Dr. Poway, CA 92064 www.mytee.com © 2019 Mytee Products, Inc. Printed in the USA...